Product Finder

Filters

Our Products

(923 products found)

Aubin®

Aubin® CR-450

End Markets

Energy

Function

Cement Retarder

Geography

EU, MENA

Application

Well Services

Business Area

Energy Solutions

Technology

Synthetic retarder

Description

A synthetic high temperature retarder for use at bottom hole circulating temperatures from 212 to 284 °F (100 to 140 °C). Aubin® CR-450 delivers predictable thickening time response and rapid transition time over a wide range of concentrations & temperatures, advantages when long liners are being cemented. Normally used at concentrations between 0.1 and 4.0 %bwoc. Aubin® CR-450 may be dry blended with cement or dispersed in the mix water, in which case the mix water should be used without delay to prevent deterioration.

Aubin®

Aubin® CR-470

End Markets

Energy

Function

Cement Retarder

Geography

EU, MENA

Application

Well Services

Business Area

Energy Solutions

Technology

Synthetic retarder

Description

A synthetic, high-temperature retarder, for use at bottom hole circulating temperatures from 90 to 140 °C (194 to 284 °F). Easier dosing control around 90 to 110 °C than Aubin® CR-475. Compatible with all API Classes of cement and most additives, Aubin® CR-470 can be used in both fresh water and sea water over a range of slurry densities. Also suitable for silicate-extended or thixotropic slurries. Delivers predicable thickening time response and rapid transition time over a wide range of concentrations and temperatures. Normally used at concentrations between 0.2 and 0.4 %bwoc, dependent on temperature, cement quality and other additives. Laboratory testing should always be carried out on all cement slurries, using representative material samples and well conditions, prior to performing a job.

Aubin®

Aubin® CR-475

End Markets

Energy

Function

Cement Retarder

Geography

EU, MENA, NAM

Application

Well Services

Business Area

Energy Solutions

Technology

Synthetic retarder

Description

A synthetic high temperature retarder, for use at bottom hole circulating temperatures from 212 to 302 °F (100 to 150 °C). Compatible with all API Classes of cement and most additives, can be used in both fresh water and sea water over a range of slurry densities. Aubin® CR-475 also finds applications in slurries where lignosulphonates are not suitable, e.g. for silicate extended or thixotropic slurries. Delivers predictable thickening time response and rapid transition time over a wide range of concentrations & temperatures, an advantage when long liners are being cemented. Aubin® CR-475 is normally used at concentrations between 0.1 and 1.5% by weight of cement. Aubin® CR-475 may be dry blended with cement or dissolved in the mixwater, in which case the mixwater should be used without delay to prevent deterioration.

Aubin®

Aubin® CR-480

End Markets

Energy

Function

Cement Retarder

Geography

EU, MENA

Application

Well Services

Business Area

Energy Solutions

Technology

Mixed retarder type blend

Description

A synthetic high temperature retarder, for use at bottom hole circulating temperatures from 120 to 200 °C (248 to 392 °F). Normally used at concentrations between 0.1 and 4.0% by weight of cement. Displays a rapid transition time and excellent compatibility with all API Classes of cement and most additives. Aubin® CR-480 can be used in both fresh water and sea water over a range of slurry densities.

Aubin®

Aubin® CSP-500

End Markets

Energy

Function

Cement Spacer Gellant

Geography

EU, MENA

Application

Well Services

Business Area

Energy Solutions

Technology

Mixed polymer blend

Description

A powder spacer additive normally mixed at a wellsite with water, weighting agent and other spacer additives, providing a finished spacer fluid with range of fluid densities. Improves mud removal and zonal isolation and prevents mud/slurry incompatibility problems. Can be applied in a wide range of fluid density, depending on weighting agent, typically 1.0 – 2.4 g/ml (8.6 – 20 lb/gal). Good fluid loss control properties, depending on final spacer composition. Stable up to 121 °C (250 °F). For thicker slurries, loading may be around 12 - 20 lb/bbl.

Aubin®

Aubin® CSP-515

End Markets

Energy

Function

Cement Spacer Gellant

Geography

EU, MENA

Application

Well Services

Business Area

Energy Solutions

Technology

Mixed polymer blend

Description

A blend of rheology modifying agents developed to provide superior mud removal and zonal isolation. Improves mud removal and zonal isolation and prevents mud/slurry incompatibility problems. Can be applied in a wide range of fluid density, depending on weighting agent, typically 1.0 – 2.4 g/ml (8.6 – 20 lb/gal). Good fluid loss control properties, depending on final spacer composition. Stable up to 121 °C (250 °F). For thicker slurries, loading may be around 8 - 15 lb/bbl.

Aubin®

Aubin® CSP-520NS

End Markets

Energy

Function

Cement Spacer Gellant

Geography

EU

Application

Well Services

Business Area

Energy Solutions

Technology

Natural polymer gellant

Description

A cement spacer additive typically used in weighted spacer designs at bottomhole temperatures below 120 °C. Aubin® CSP-520NS is a powder spacer additive normally mixed at a wellsite with water, weighting agent and other spacer additives, providing a finished spacer fluid with range of fluid densities. Improves mud removal and zonal isolation, prevents mud/cement slurry incompatibility problems and affords good fluid loss control properties, with the correct final spacer composition. Stable up to 121 °C (250 °F). Due to the variation in drilling mud and cement slurry composition, laboratory fluid compatibility tests should always be run prior to performing a cement job.

Aubin®

Aubin® CSP-600

End Markets

Energy

Function

Cement Spacer Gellant

Geography

EU, MIDDLE EAST

Application

Well Services

Business Area

Energy Solutions

Technology

Mixed polymer blend

Description

A cement spacer additive typically used in weighted spacer designs at bottomhole temperatures below 150 °C. Cement spacer Aubin® CSP-600 is a powder that is normally mixed at the wellsite along with water and weighting agent to provide a finished spacer fluid with the required fluid density; a spacer surfactant (such as Aubin® CSS-04) is also normally used in such a system. Spacers made with Aubin® CSP-600 improve mud removal and zonal isolation, prevent mud/cement slurry incompatibility problems and afford good fluid loss control properties, with the correct final spacer composition. Allows for a wide range of fluid density (typically 8.4 to 20 lb/gal); due to the variation in drilling mud and cement slurry composition, compatibility testing should always be run in a laboratory prior to performing a cement operation.

Aubin®

Aubin® CSS-04

End Markets

Energy

Function

Cement Spacer Surfactant

Geography

EU, MENA, NAM

Application

Well Services

Business Area

Energy Solutions

Technology

Mixed surfactant and solvent blend

Description

A cement spacer surfactant that has been developed for use in spacer systems, in order to remove hydrocarbon films and residues left behind from aqueous and non-aqueous drilling fluids. Through this function, cement slurry contamination can be minimized, ensuring cementing performance is delivered as expected. Additionally, Aubin® CSS-04 will leave surfaces-water wet, therefore aiding cement bonding and preventing possible communication channels between zones. Aubin® CSS-04 is classified under the OCNS as Gold rated with no substitution warning. Application rates typically range from 0.5 – 3 gal/bbl of spacer in fresh water and brine systems, although this will be dependent on the specific drilling fluid for a given application.

Aubin®

Aubin® CTX-15

End Markets

Energy

Function

Cement Thixotropic Additive

Geography

EU, MENA

Application

Well Services

Business Area

Energy Solutions

Technology

Mixed metal salt blend

Description

A liquid, cement thixotropic additive, which allows slurries to become immobile quickly when they are removed from high shear flow conditions. Thixotropic slurries are used where there is likely to be excessive fallback of the cement column, or where losses into the formation are high. In combination with a suitable pumping schedule, the flow of the slurry is stopped for a few minutes, allowing the slurry to gel and become immobile. When pumping is recommenced the slurry is readily moved in the high-shear area in the annulus, but remains static in the lower-shear zone of the loss area. In this way, better fill-up is achieved, with reduced slurry loss. These properties may also be useful in grouting applications. Normal slurry density range is 13 to 15.5 lb/gal (1.56 to 1.86 kg/L). Aubin® CTX-15 is normally used at 0.4 to 1.0 gal/sk of cement (3.55 to 8.88 L per 100 kg cement).

Aubin®

Aubin® CTX-35R

End Markets

Energy

Function

Cement Thixotropic Additive

Geography

EU, MENA, NAM

Application

Well Services

Business Area

Energy Solutions

Technology

Metal salt

Description

A thixotropic additive, which allows slurries to become immobile quickly when they are removed from high shear flow conditions. Designed to be used with Portland cement in primary cementing, lost circulation and squeeze applications, where the slurry is required to become immobile after placement. The use of calcium chloride increases the rate of gel strength development as well as accelerating the setting of the slurry. CTX-35R reacts with the C3A in the cement to provide thixotropy and a slight expansion of the cement when it sets. The reaction also results in the set cement being more resistant to attack by sulphate and chloride brines. Commonly used at 10 %bwoc, but can be used at various ratios to achieve the slurry properties required. Lost circulation materials can be added to the slurries to help control slurry loss into thief zones.

Aubin®

Aubin® CW-20

End Markets

Energy

Function

Wellbore Cleaner

Geography

AMERICAS, EU, MENA

Application

Well Services

Business Area

Energy Solutions

Technology

Non-ionic surfactant blend

Description

Aubin® CW-20 wellbore cleaner is normally used during drilling displacement operations, where it dissolves hydrocarbon fractions of both water- and oil-based mud residues, providing excellent mud removal and water wetting. For this reason, Aubin® CW-20 is used as pre-treatment for cementing operations, as it improves bonding to casing and formation. Aubin® CW-20 can also be used as a pre-flush ahead of a weighted spacer, as well as for pit cleaning and rig washing. Application rates as a casing cleaner are typically 5-20 % v/v in fresh water, seawater or brine.

Aubin®

Aubin® CW-30

End Markets

Energy

Function

Wellbore Cleaner

Geography

EU, MENA, NAM

Application

Well Services

Business Area

Energy Solutions

Technology

Chemical blend

Description

Scales and clays may aggregate downhole in operations with all types of mud and are a common factor in stuck pipe during drilling operations. Aubin® CW-30 can be used following both water and oil-based mud applications, with some solvency properties for both types of mud, with the mechanism of action targetting scales and clays collected during drilling. For pipe release applications, Aubin® CW-30 is used neat and adequate volumes should be used to ensure complete break-down of filter cake.

Aubin®

Aubin® DF-4

End Markets

Energy

Function

Cement Defoamer

Geography

EU, MENA, NAM

Application

Well Services

Business Area

Energy Solutions

Technology

Glycol-based polymer

Description

A cement antifoam used in the temperature range 80 – 300 °F. Certain materials used to modify the properties of cement slurries are known to cause foaming or air entrainment, or both. The resulting inaccuracies in slurry density measurements may cause the operator to reduce the water content in order to raise the surface density to the specified value. A severely reduced pumping time may be the end result, especially if retarders and other additives are premixed in the water. Aubin® DF-4 is used to help prevent foaming and air entrainment caused by additives such as retarders, fluid loss agents, and salt. No effect on cement properties has been found with Aubin® DF-4, and it is compatible with all API classes of cement and all additives including accelerators, retarders fluid loss additives, dispersants etc. Normal dosages of 0.02 to 0.05 gps, depending on the slurry design and slurry mixing method.

Aubin®

Aubin® EVO-Pig LG

End Markets

Energy

Function

Gel Pig Technology

Geography

GLOBAL

Application

Well Technologies & Pipelines

Business Area

Energy Solutions

Technology

Water based multicomponent

Description

Elastomeric pig suited for use where mechanical pigs cannot be transmitted. Used alone or in conjunction with gels and associated chemical products to maintain pipelines that would otherwise be considered “unpiggable”. Able to be compressed without alteration of their physical properties. Ability to regain, and retain, their original shape after compression and navigation of geometric pipeline changes. Readily negotiate short radius bends. To function effectively for pig transfer and use, it is not recommended to exceed 30 °C in storage.
Contacts Suppliers