Product Finder

Filters

Our Products

(923 products found)

Aubin®

Aubin® CD-1B

End Markets

Energy

Function

Cement Dispersant

Geography

EU, MENA

Application

Well Services

Business Area

Energy Solutions

Technology

Sulfonated naphthalene-formaldehyde resin

Description

A naphthalene polymer-based dispersant for cement slurries and is recommended for use at temperatures above 60 °F. Excellent friction reduction is obtained due to reduced viscosity of cement slurries. Friction reduction is especially important where the annulus is less than one inch, so that frictional pressures are not exerted on the formation during cement placement. This allows for efficient mud removal while pumping slurries at high velocities. Aubin® CD-1B is normally used at concentrations between 0.1 and 0.5 %bwoc. Aubin® CD-1B can be added to mix water or can be dry blended with cement.

Aubin®

Aubin® CD-4

End Markets

Energy

Function

Cement Dispersant

Geography

MENA

Application

Well Services

Business Area

Energy Solutions

Technology

Sulfonated naphthalene-formaldehyde resin

Description

A naphthalene polymer-based dispersant for cement slurries and is recommended for use at temperatures above 60 °F. Excellent friction reduction is obtained due to reduced viscosity of cement slurries. Friction reduction is especially important where the annulus is less than one inch, so that frictional pressures are not exerted on the formation during cement placement. This allows for efficient mud removal while pumping slurries at high velocities. Aubin® CD-4 is normally used at concentrations between 0.1 and 0.5 %bwoc, and can be added to mix water or can be dry blended with cement.

Aubin®

Aubin® CD-6Lt

End Markets

Energy

Function

Cement Dispersant

Geography

EU, MENA

Application

Well Services

Business Area

Energy Solutions

Technology

Sulfonated naphthalene-formaldehyde resin

Description

A liquid additive that is added to the cement mix water. Used at temperatures up to 450 °F (232°C). Unlike many dispersants, has little retarding effect. Depending on slurry design, used at concentration of 0.15 to 0.35 gal/sk of cement. Reduces rheological properties of cement, lowering friction pressure, easier to achieve turbulent flow. Can enhance the performance of fluid loss control additives.

Aubin®

Aubin® CD-8

End Markets

Energy

Function

Cement Dispersant

Geography

MENA

Application

Well Services

Business Area

Energy Solutions

Technology

Sulfonated acetone-formaldehyde resin

Description

A powder cement dispersant additive which is essentially non-retarding and compatible with a wide variety of cement slurry designs, including those using salt water. Reduces rheological properties and allows turbulent flow to be achieved at lower pump rates. By reducing the apparent viscosity, lower water content can be utilized, allowing for an increase in slurry density without the need for adding weighting agents. Aubin® CD-8 is a free flowing powder that can be dry-blended into cement or added to mix water. Used at temperatures up to 450 °F (232°C) and at concentrations of 0.1 to 1 %bwoc (typically 0.2 to 0.4 %bwoc). Unlike many dispersants, almost no retarding effect. Reduces rheological properties of cement, lowering friction pressure, making it easier to achieve turbulent flow. Can enhance the performance of fluid loss control additives.

Aubin®

Aubin® CFL-350

End Markets

Energy

Function

Cement Fluid Loss Additive

Geography

EU, MENA

Application

Well Services

Business Area

Energy Solutions

Technology

High molecular weight AMPS-acrylamide-based polymer

Description

A fluid loss control additive for cement slurries for a wide range of temperatures up to 400 °F.. Mildly retarding, and slightly dispersing, Aubin® CFL-350 avoids high gel strengths, making it particularly suitable for coil tubing and squeeze work. The lack of gelation of the slurry by Aubin® CFL-350 helps avoid gas migration problems. Aubin® CFL-350 is effective in slurries using fresh to salt-saturated water. Loadings are typically in the range of 0.3 – 1.0% - the exact loading necessary will depend on laboratory testing.

Aubin®

Aubin® CFL-387M

End Markets

Energy

Function

Latex Stabilizer

Geography

EU, MENA

Application

Well Services

Business Area

Energy Solutions

Technology

Anionic surfactant blend

Description

A surfactant stabilizer, used with latex cement additives to extend their operational temperature • Typically used in a loading of 4 to 15 %v/v compared to the latex being used in a cement slurry. • Can boost the performance of some latex (such as Aubin® CFL-381M) to temperatures up to 160 °C. • Due to variations in cement, laboratory testing should always be conducted on any slurry design prior to a cement job.

Aubin®

Aubin® CFL-401

End Markets

Energy

Function

Cement Fluid Loss Additive

Geography

MENA

Application

Well Services

Business Area

Energy Solutions

Technology

High molecular weight AMPS-acrylamide-based polymer blend

Description

A fluid loss control additive for cement slurries typically used in low to medium temperature applications (typically 300 °F maximum). Aubin® CFL-401 is compatible with most retarders and is typically used in 0.5 to 1 %bwoc loadings. Laboratory testing is recommended prior to any job, to confirm exact loadings of required additives.

Aubin®

Aubin® CFL-575

End Markets

Energy

Function

Cement Fluid Loss Additive

Geography

MENA

Application

Well Services

Business Area

Energy Solutions

Technology

High molecular weight AMPS-acrylamide-based polymer blend

Description

A fluid loss control additive for cement slurries for a wide range of temperatures up to 400 °F. Provides cost effective fluid loss control with typical loadings of 0.5-2.5 %bwoc, dependent on temperature and slurry design. Performs well in freshwater and in brines up to 18 % salt saturated. Used with synthetic and lignosulfonate-based retarders. Compatible with gas control additives CFL-381M, microsilica, etc. Confirmation testing with field cement and additives is always recommended prior to operations.

Aubin®

Aubin® CFL-585

End Markets

Energy

Function

Cement Fluid Loss Additive

Geography

MENA

Application

Well Services

Business Area

Energy Solutions

Technology

High molecular weight AMPS-acrylamide-based polymer blend

Description

A fluid loss control additive for cement slurries for a wide range of temperatures up to 400 °F. Provides cost effective fluid loss control with typical loadings of 0.5-2.5 %bwoc, dependent on temperature and slurry design. Performs well in freshwater and in brines up to 18 % salt saturated. Used with synthetic and lignosulfonate-based retarders. Compatible with gas control additives CFL-381M, microsilica, etc. Confirmation testing with field cement and additives is always recommended prior to operations.

Aubin®

Aubin® CFL-601

End Markets

Energy

Function

Cement Fluid Loss Additive

Geography

MENA

Application

Well Services

Business Area

Energy Solutions

Technology

High molecular weight AMPS-acrylamide-based polymer

Description

A powder cement fluid loss additive with low gelation potential when left static, typically used up to 350 °F.

Aubin®

Aubin® CR-105

End Markets

Energy

Function

Cement Retarder

Geography

EU, MENA, NAM

Application

Well Services

Business Area

Energy Solutions

Technology

Lignosulfonate retarder

Description

A modified lignosulphonate retarder for use when the bottom hole circulating temperature is below 99 °C (210 °F) Aubin® CR-105 has good dispersing properties and can be used in both fresh water and sea water over a range of slurry densities. Provides longer pumping time and delayed onset of compressive strength. Delivers predictable response over range of concentrations and temperatures. Aubin® CR-105 is usually used at concentrations between 0.1 and 0.5% bwoc.

Aubin®

Aubin® CR-112S

End Markets

Energy

Function

Cement Retarder

Geography

EU, MENA

Application

Well Services

Business Area

Energy Solutions

Technology

Mixed retarder type blend

Description

A powder cement retarder that is typically used when the bottom hole circulating temperature is above 180 °F. Provides effective retardation of the cement slurry in casing, liner, squeeze and abandonment applications. Aubin® CR-112S has limited dispersing properties and is normally used in conjunction with dispersants, such as Aubin® CD-1B, Aubin® CD-4, Aubin® CD-6 or Aubin® CD-8.

Aubin®

Aubin® CR-130

End Markets

Energy

Function

Cement Retarder

Geography

EU, MENA

Application

Well Services

Business Area

Energy Solutions

Technology

Synthetic retarder

Description

A high temperature retarder used at bottom hole circulating temperatures up to 350 °F. Aubin® CR-130 is usually used at concentrations between 0.1 and 0.5 %bwoc. It is compatible with other cement additives including polymer-based fluid loss additives and dispersants. The effect of Aubin® CR-130 on thickening time varies considerably from one brand of cement to another. It is recommended that each system is laboratory tested when designing the slurry to be run in the field. Do not age in mixwater for prolonged periods of time at low pH with polyols, PVA and some other polymers. If considering powder blending into cement, we recommend closely related Aubin® CR-120SB.

Aubin®

Aubin® CR-245

End Markets

Energy

Function

Cement Retarder

Geography

EU, MENA

Application

Well Services

Business Area

Energy Solutions

Technology

Synthetic retarder

Description

A medium temperature cement retarder which can be used at 160 to 220 °F BHCT. Typically used at 0.1 to 2.0 %bwoc, dependent on temperature and slurry design. Soluble in mixwater; this product may degrade if stored in mixwater for excessive times, particularly in warm weather and with the presence of microbes in the water. If stored for prolongued times, it is recommended to prepare new mixwater or retest mixwater samples. Avoid excessive stacking pallets, if clumping is of concern.

Aubin®

Aubin® CR-400

End Markets

Energy

Function

Cement Retarder

Geography

EU, MENA

Application

Well Services

Business Area

Energy Solutions

Technology

Synthetic retarder

Description

A synthetic retarder formulated to be effective at bottom hole circulating temperatures below 93 °C (200 °F) Aubin® CR-400 is stable through its temperature range and is of low sensitivity to small changes in concentration. Advantageous when long liners are cemented, cement sets in acceptable time at cooler liner top temperatures. Aubin® CR-400 is normally used at concentrations between 0.1 and 1.0% BWOC: generally 0.5% will give around 4 hours thickening time at 90°C (194°F). The effect of Aubin® CR-400 on thickening time can vary from one brand of cement to another; it is recommended that each slurry is laboratory tested to finalise the design.
Contacts Suppliers